Pioneer TS-A6882R 6" x 8" 4-Way 280-Watt Speakers

Brand: Pioneer
Category: Car Audio or Theater

Buy New: Too low to display
as of 9/9/2010 23:26 EDT details

In Stock

New (3)

Seller: Electronic Express
Rating: 5.0 out of 5 stars

reviews

Media: Electronics
Autographed: No
Memorabilia: No
Shipping Weight (lbs): 6.5
Dimensions (in): 11.7 x 8.9 x 3.8
Woofer 6"x8"
Midrange Ø1-1/2" Dome
Tweeter Ø1/2" Dome
Super Tweeter Ø3/8" Dome
Impedance 4 Ohms
Sensitivity 90 dB (±1.5 dB)
Frequency Response 35 Hz to 27 kHz (-20 dB)

MPN: TS-A6882R
Model: TS-A6882R
UPC: 834120011185
EAN: 0125628815918

Availability: Usually ships in 1-2 business days

Features:

•	6-by-8-inch, four-way speakers with 280 watts maximum power handling (50 watts nominal)
•	Woofers feature composite IMPP cone with interlaced dual aramid fiber and butyl surround
•	1-1/2-inch soft dome midrange, 1/2-inch dome tweeter, 3/8-inch dome supertweeter
•	Full depth basket for rich bass response
•	35 Hz to 27 kHz frequency response with 90 dB sensitivity

Pioneer's A-Series Speakers

Pioneer A-series speakers outperform factory speakers on nearly every level. Packing a powerful punch, A-Series speakers are equipped with up to three independent tweeters with reinforced woofers, so every beat is heard and felt. Featuring a bigger, better cone than most OEM speakers, the A-series boasts serious output and booming bass. Extra-sensitive tweeters play at higher frequencies and are capable of handling stronger audio signals, resulting in vocals that are crisp and clear, even when you crank the volume.

TS-A6882R Features

Composite IMPP Cone with Interlaced Aramid Fiber
With long aramid fibers interlacing together inside, this IMPP cone design provides the strength and rigidity that powerful bass sound requires. High-density compressed internal architecture is resilient, stacks up against high power well and transfers sound quickly. The result is full-bodied, rich sound character with midrange depth that conventional IMPP cones cannot match.

Butyl Rubber Surrounds
Durable butyl rubber speaker surrounds won't fall apart under the stress of extreme temperatures, sunlight or time, and help Pioneer's woofers deliver serious bass.

Power Handling
The TS-A6882R now handles a full 280 watts max. power (50 watts nominal). Along with enhanced power handling, you still get the same high performance that all the TS-A's deliver.

6" x 8" Perfect Fit Speakers
There are a few things in life we'll never understand. Like why do stereo companies keep trying to force people to put 5" x 7" speakers in 6" x 8" holes? It doesn't look or sound right. That's why Pioneer researched exactly what dimension speakers would work best with what cars. If it doesn't fit perfect, it's not gonna sound perfect.

A 6-8-inch four-way speaker with 280 watts power handling.
Click to enlarge or view dimensions diagram.

TS-A6882R Specs

Woofer Cone Material:	Composite IMPP Cone with Interlaced Dual Aramid Fiber
Surround:	Butyl Rubber for Smoother Respons
Voice Coil Bobbin:	Glass-Imide
Damper:	Conex
Midrange:	1-1/2" Lightweight Balanced Soft Dome Midrange with Neodymium Magnet and Magnetic Fluid
Tweeter:	1/2" Dome Tweeter
Supertweeter:	3/8" Dome
Custom-Fit Basket:	Custom Fit for Ford and Mazda
Basket Design:	Full Depth Basket for Rich Bass Response
Watts MAX. Music Power:	280 Watts
Watts Nominal Power Handling:	50 watts
Frequency Response:	35 Hz to 27 kHz
Sensitivity (1W/1m):	90 dB
Ohm Rating:	4
Mounting Depth:	2-1/2" (62 mm)
Cut-out Dimensions:	7-1/2" x 5-1/4" (191 mm x 133 mm)

Pioneer Car Audio Systems

Pioneer's Mobile Business Group is known for offering the kind of in-car products that make driving more enjoyable by offering high quality audio and video, seamless connectivity and ease-of-use. Its focus is on the development of new digital technologies including audio video, navigation and satellite radio, while maintaining its strong heritage in products for car audio enthusiasts and sound competitors.

What's in the Box

Pioneer TS-A6882R Four-Way Speaker (Pair), Mounting Hardware, Installation Guide

Product Description
PIONEER TS-A6882R 6" X 8" 4-WAY 280-WATT SPEAKER280W MAX, 50W NOMINAL; ARAMID FIBER IMPP CONE; BUTYL RUBBER SURROUND; 1.25" BALANCED DOME MIDRANGE;.5" X .375" DOME TWEETERS; FITS FORD & MAZDA

Customer Reviews:

1 2 3 4 5 6 Next »

wow sound July 29, 2008
Michael D. Dean (usa)
10 out of 10 found this review helpful

I installed these speakers in my 2004 Ford Ranger, and the sound was outstanding. After I installed them I sat in the truck and listened and was totally amazed at the sound coming from them. I felt like I was in a live concert, each instrument was clear and the bass coming from them was beyond what I could describe. I left the factory radio in, which is the six cd changer that plays mp3 disc. I thought maybe I would change it also, but after listening with these speakers I think I will just leave it in. I had to decrease the bass and treble because the speakers are so efficient. And also I had to turn the volume down. I also put the 3 way Pioneer speakers in the rear. But the 4 way gave the wow sound. Try them and you will not be disappointed.

5 out of 5 stars

Great speakers! September 21, 2008
C. Vargas (Miami, Florida United States)
3 out of 3 found this review helpful

I bought these speakers for use in my Mazda Protege 2000 front doors, for which these speakers are designed. They were replacing some old generic speakers I had installed a few years ago which had kicked the bucket. I had these installed with the Kenwood Excelon KDC-X592 CD receiver radio system, and what a difference! These speakers sound great combined with this radio (or similar); just make sure that the radio you buy can keep up with the power output of the speakers for maximum enjoyment!

4 out of 5 stars

Clear, Crisp sound. February 6, 2010
A. Stoikes (Wisconsin)
2 out of 2 found this review helpful

Pros- Louder, 60w constant wattage meaning my JVC stereo doesn't have enough wattage to blow em out (thats good). Perfect fit for my 02 Ford Ranger. Very clean, crisp sound. If it's not, then your input is bad, because these speakers are like you are there with the band. They don't look too gaudy either, I can see a little shine from behind my stock door panel, it looks cool!

Cons- Bass isn't that great, but hey, these are 4-way speakers. If you want bass speakers get 2 ways.

Last thoughts- I'd buy it again! They were reasonably priced, and a direct fit to my old speakers.

5 out of 5 stars

Great 4-way 6" x 8" rear shelf speakers October 23, 2009
Steve T. (Glendale, CA USA)
2 out of 2 found this review helpful

I bought these speakers to replace stock one's in the back rear shelf of a car. The stock ones that they replaced were smaller and this was the largest size that I could upgrade to. They are great sounding and were a decent price, especially for the 4-way feature they have, you get the high's, low's and deep sub-woofer sounds, as they are supposed to be. They are a pair, bye the way, you will get two speakers here, just so that you know.

5 out of 5 stars

Better than stock ford explorer 2000 speakers October 14, 2009
Stoneacheck
2 out of 2 found this review helpful

I enjoy good sound. I have nice Shure in-ear headphones, decent klipsch bookshelf speakers for my home theater, and have learned how to tell the difference if an MP3 is encoded in a bitrate lower than V0 VBR. Point is, I've been rolling around with a stock head unit and speakers in my explorer for the last 3 years. Why? Laziness, fear of destroying the car, etc. Turns out, the interior panels are really easy to take off. I didn't want to replace the head unit yet because a.) i just wanted to try my hand at car audio and see what i could do. If i screwed it up, no big deal, my old speakers weren't even bad, people think they are much nicer than stock to begin with. Keep in mind these do not come with the "harnesses" that match up to the piece of plastic the stock speakers use. I suppose you could pay for these things, I just stripped the wire down behind where the male end of the harness lives in the door, and crimped in the wire that came with the speakers, wrapped some nice new and sticky electrical tape around it, and was good to go. door panels back on and enjoying the music. Tools required? philips, flathead (to pry door handle piece off), wood chisel (to pry entire door panel off), good grip, and a strong stomach (the sound of the plastic slugs ripping outta their slots the first time is scary scary. Lastly, you'll need wire cutters/strippers if you do it my way, and a vice grip needlenose pliers to undo some of the screws holding down the speaker (might be real tight, those pliers loosen em right up).

ok, the part most people will care about without explorers. The sound quality... it's actually really nice, like everyone else said. It's not mind blowing, but its quite clear, and I couldn't hear any distortion, despite cranking it louder than I would ever listen. Keep in mind i kept my stock head unit. Would they sound better with a aftermarket one? i'm sure, would I notice or want to spend the money to make my car look tacky with bright blue and red LEDS that don't match anything. nah. bottom line is they sound about 50 bucks better than the old speakers. mids are clearer, bass is much much tighter (it used to "roll" a lot, like you couldn't separate out kick drum from basslines, and was too boomy. these have a lot of punch but are accurate, not overdone). highs are also quite "present" to use a audio nerd word. aka, its not piercing. i did listening tests on everything from John Mayer's live material to Coheed, Ratatat, Al Green, and Death Cab for Cutie. Wide range, all sounded great. I had a great experience. It was pretty fun too.

Only other thing i'd recommend is if you cut into your wires, find out which are pos and neg. I hit up a local auto shop and they looked it up for me on a site called Directech? good luck and enjoy!

1 2 3 4 5 6 Next »

In Stock

DISCLAIMER: This is an Amazon storefront - the products referenced on this site are manufactured and sold by parties other than CheapCarAudio.org
and its affiliates. Any questions, complaints, or claims regarding the products must be directed to the appropriate manufacturer, vendor or to Amazon.com

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.